Danfoss PLUS+1 Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 12

Danfoss PLUS+1 Series Скачать руководство пользователя страница 3

Technical Information

Output Configurations for PLUS+1® Controllers

520L0922

• Rev EA • Sep 2013

3

About This Manual

This publication is intended to share circuits, products and other useful application information

not otherwise found in other Danfoss publications. It is written to inform and aid the reader in the

successful application of Danfoss products.

PLUS+1 Controllers

Configurable Outputs

Driving Different Types of Loads ......................................................................................................................................... 4

Driving a Relay or ON/OFF Valve ......................................................................................................................................... 4

Driving an Incandescent Lamp ............................................................................................................................................ 6

Driving a Bidirectional Proportional Valve ...................................................................................................................... 7

Driving a Unidirectional Proportional Valve ................................................................................................................... 9

Driving a PVE Valve ................................................................................................................................................................... 9

Driving a 4-20 mA Device ....................................................................................................................................................... 9

FMEA Considerations

Open Ground Wire to Controller ....................................................................................................................................... 10

Open Wire to Controller ..................................................................................................................................... 10

Open Ground Wire to Load ................................................................................................................................................. 11

Contents

«
1
2
3
4
5
...
»

Содержание PLUS+1 Series













Отзывы:

Нет отзывов