Technical Information
DP7XX Series PLUS+1® Mobile Machine Displays
L1315553
• Rev DA • Dec 2013
15
Product Ratings
Electrical
Supply Voltage
Description
Unit
Minimum
Maximum Comment
DC supply voltage
V
9
36
With reverse polarity protection
DC supply current (circuit board only)
A
0
1
UBat = 14 V
0
0.5
UBat = 28 V
Power supply interruption
(without rebooting)
ms
—
—
200 ms
5 V Reference Output
Description
Unit
Minimum
Maximum
Output voltage
V
4.8
5.2
Output current
A
0
0.5
Output short circuit
A
—
1
Short circuit protection
V
0
36
Measuring of output voltage
V
0
5.75
Resolution
mV
1.4
Worst case error
mV
± (20+U*2%)
Warning
Output pins produce high voltage. High voltage can cause fire and/or electrical shock, if flammable
gasses or chemicals are present, can cause an explosion. To protect against product damage and
possible injury, do not exceed power supply voltage ratings and do not store this product where
flammable gasses or chemicals are present.
Environmental
General
Description
Units
Minimum
Maximum
Comment
Operating temperature
˚C [˚F]
-30 [-22]
+60 [+140]
—
Storage temperature
˚C [˚F]
-30 [-22]
+80 [+176]
—
Ingress Protection (IP) rating
IP67
With mating connector installed and
sealing plugs in unused connections.
Warning
Excessive high/low operating/storage temperatures can damage electronics. Damaged electronics
can result in performance failure. To protect against product damage and possible injury, do not
operate/store product in a environment that exceeds specified temperature ratings.