•
Danfoss has no responsibility for any consequences (direct or indirect) caused by failures or
malfunctions.
•
Danfoss has no responsibility for any accidents caused by incorrectly mounted or maintained
equipment.
•
Danfoss does not assume any responsibility for PLUS+1
®
products being incorrectly applied or the
system being programmed in a manner that jeopardizes safety.
•
All safety critical systems shall include an emergency stop to switch off the main supply voltage for
the outputs of the electronic control system. All safety critical components shall be installed in such a
way that the main supply voltage can be switched off at any time. The emergency stop must be easily
accessible to the operator.
•
A system FMEA should be performed on all applications.
CS100 interfaces are designed for transmitting data that is available within a CAN network via LTE 4G
Cat.M1, additionally via GSM/GPRS/EDGE.
The interfaces are suitable for use in mobile and stationary systems for industry, small business area, and
in agricultural and forestry machinery. Featured is an easy-to-install plastic enclosure which can be bolted
to a panel.
The devices have integrated antennas and must be installed properly to the machine to avoid bolt
interference and to ensure the recommended line of sight to the sky.
Service and support
Contact PLUS+1
®
Support and Services:
The most recent driver, firmware, tools and documentation versions are available for download from
https://www.danfoss.com/en/products/software/?sort=default_sort
C
Caution
Warranty will be voided if device is opened.
Device is not field serviceable. Do not open the device.
Technical Information
PLUS+1 Connect CS100 IoT Gateway — Professional Install Only
Device elements
8 |
©
Danfoss | October 2020
BC299456869228en-000101
