1
Manual RS.8A.N5.0 © Danfoss 10-007
m Version 3.11
Use this option to select the scanning mode for the Point Detail screen. When
this mode is selected, the display on the Point Detail screen will cycle through
all the activated points in turn pausing for 3 seconds on each one so that the
current status may be read.
To display the alarm history, select the Alarm History option from the Main
Menu. The Alarm List screen is displayed with the most recent alarm heading
the list.
Up to 999 latest alarms can be viewed.
Each alarm is given a number from 1 to 999 (restarting at 1 after the 999th) and
is time and date stamped. The description shows the information relevant to
each point. The two ‘ ’ symbols at the bottom of the screen indicate that the
list continues. The list can be scrolled up and down using the ‘ ’ or ‘ ’ keys.
Press ‘
↵
’ to display events with the alarms.
To display the alarm history for a point, select the point detail screen, then press
the and keys together. The Alarm List screen is displayed listing all alarms
for the selected point only.
To display the event history, select the Event History option from the Main
Menu. The Event List screen is displayed with the most recent event heading
the list.
The latest 100 events stored are viewed. The list can be scrolled up and down
using the ‘ ’ or ‘ ’ keys.
If a parallel printer is connected, a series of printouts can be initiated in
condensed mode. To perform a print operation, select the Print Menu option
from either the Main Menu or by pressing the‘ ’
‘
key on all screens except the
Alarm/Event List screens. In either case, the Print Menu screen is displayed.
Use this option to print the current status of all points.
Note:
Only those points which have their log action set to ON will be printed.
Use this option to print an individual graph of each of the points in turn. From
the Print Menu, select the Graph of All Points option. The Select Period screen
will then appear. Use the ' ', ' ', ' ' and ' ' keys to enter the required value
and the '
↵
' key to move through each field. The Printing in Operation screen is
displayed and the data is sent to the printer.
Note:
Only those points which have their graph action set to ON will be printed.
Use this option to print a list of all the alarms and events. The Alarm/Event List is
printed showing the Alarm List followed by the Event List.
From the Print Menu, select the Alarm List option. The Select Period screen will
then appear. Use the ' ', ' ', ' ' and ' ' keys to enter the required value and
the '
↵
' key to move through each field. The Printing In Operation screen is then
displayed and the data is sent to the printer.
Each alarm is given a number from 1 to 999 (restarting at 1 after the 999th) and
is time and date stamped. The description shows the information relevant to
each point.
Similarly, each event is time and date stamped and the description shows the
information relevant to each event.
Note:
This operation may take considerable time and paper.
Point Detail Scan
Print Menu
Event History
Point Alarm List
Log of All Points
Graph of Selected Points
Alarm History
Alarm History
