16
VIIFR102 © Danfoss 03/2014
Installation manual
Danfoss Link™ HP kit
When DanfossLink
™
CC are used in conjunction with Online 2*, they can be integrated in the following two ways:
• System integration
• No system integration
“No system integration” is the default method during installation. When system integration is selected, Danfoss
Link
™
CC manages most functions in the heat pump. In this case, the functions controlled by Danfoss Link CC
™
are
locked in relation to Online. The table below shows the relationship between disabled and enabled functions from
an Online perspective.
Tab
Section
Function
System integr. No system
integr.
Status
Indoor temperature (value: ROOM
(+/-)
No
Yes
Details
Heat curve
Curve
No
Yes
Min
No
Yes
Max
No
Yes
+5 ºC
No
Yes
0 ºC
No
Yes
-5 ºC
No
Yes
Heat stop
Yes
Yes
Room factor
No
Yes
Danfoss DHP-AQ
Calendar
control
Temperature decrease
No
Yes
Hot water block
Yes
Yes
Quiet mode
Yes
Yes
EVU mode
Yes
Yes
Yes
Yes
Danfoss DHP-H, L Calendar
control
Temperature decrease
No
Yes
No = Function cannot be changed via Online when the system is in ”system integration”
Yes = Function can be changed Online regardless of whether system integration has been enabled or not
Using the Online application, you can change the integration options and go from “System integration” to “No
system integration” and take control of the function settings and vice versa.
Using Danfoss Link™ CC with Online 2
* The following does not apply to HP kits with product numbers: 086L2381 and 086L2382, as these are not
compatible with Online 2.
