Danfoss HC6000, Инструкция пользователя

Страница: 10 / 72

10
U
ser Instruc
tions
GB
1. To enter THERMOSTAT mode press both
and buttons together and hold down for
2 seconds to enter
WEEKEND into WEEKDAY
override.
2. Press both and buttons together for a
second time and hold down for 2 seconds
to enter
THERMOSTAT mode. The default
setting is heat only.
3. Once in THERMOSTAT mode it is possible to select the
required heating and cooling temperatures and the thermostat
operating mode, see below for setting details.
4. Use or buttons to select required heating temperature.
5. Press SELECT button to select COOL mode
then use or buttons to select required
cooling temperature.
6. Press SELECT button twice again to return
to AUTO mode. The thermostat will now
operate heating and cooling to maintain the
selected temperatures.
7. Should Heat only or Cool only be required, use SELECT button
to select required service.
8. Should system OFF be required, use SELECT
button to select “Off ”.
Please note: Frost protection is not provided in OFF mode.
THERMOSTAT mode can be cancelled at any time by pressing
both and buttons together and holding down for 2 seconds.
This will return the unit to normal running mode.