![background image](http://html.mh-extra.com/html/danfoss/glt80tdc/glt80tdc_installation-manual_506527005.webp)
Wiring and Connections
The FDC3 electronic driver features a terminal
board where all connections are made. The
terminal layout is described in Fig. 1:
Wiring Diagram
PC
SPI
ELECTRONIC INTEGRAL MANAGER
CONTROL PANEL
THERMOSTAT
ELECTROMECHANICAL
OR ELECTRONIC
FAN 12V
BATTERY
FUSE
FDC3
ELECTRONICAL DRIVER
24÷42V
ALARM SWITCHER
Fig 1. FDC3 wiring
scheme
NO RESISTOR IS NEEDED TO BE INSTALLED IN
FDC3 ELECTRONIC DRIVER
When connecting the electronic driver to the
compressor, any position of the connector
is possible under an electrical point of view.
However, in practice, the vertical position is not
possible because the electronic box cannot be
assembled. The connector should be connected
as shown below:
Fig 2. Connection of the
FDC3 electronic driver to
the compressor
5
FRCC.PI.044.A1.02
Содержание GLT80TDC
Страница 2: ......