Danfoss
FT1555-BM230 Bench Mount Hose Capping System Operator’s Manual
4 | © Danfoss FT1555-BM230 Bench Mount Hose Capping System Operator’s Manual | 2023.04.
AQ453954047097en-010101
Safety Symbols for the UC-CSS-203V-AK
HOT SURFACE
HOT SURFACE
DO NOT PLACE FINGERS
IN AIR KNIFE OPENING
DO NOT PLACE FINGERS
IN AIR KNIFE OPENING
CAUTION
ELECTRICAL HAzARD
Safety Precautions
The following precautions must be followed when using the FT1555-BM230. Failure to follow warnings and fully understand the
operation of the FT1555-BM230 could cause serious injury to the operator or other personnel and may void warranty.
Before starting to use the FT1555-BM230 read the operation instructions and take care of the safety precautions as indicated.
Safety glasses are mandatory when operating the FT1555-BM230
The unit is never to be operated without safety cover(s) and heat guard removed.
Do not use the system until you are sure that the routine checks described have been completed and that the routine preventive
maintenance program is up-to-date. If any part of the system is known (or suspected) to be defective or wrongly adjusted do not
use the system until a repair has been made. Operation of the system with defective or wrongly adjusted components could create
safety hazards. This could lead to serious personal injury.
Do not touch the areas of the machine housing around the Air Knife/ Heat Guard, as these surfaces are hot and can cause burns.
Let the machine housing surfaces cool down before touching external surfaces of the machine.
Do not put your fingers or hand in the opening of the Air Knife, risk of burning fingers or hand.
*Be sure to keep the work area around the FT1555-BM230, clean and dry at all times.
Do not place any objects into the Air Knife other than ends of hose or tube assemblies with a CapSeal Capsule.
Residual Risks
!
Hazardous Situation
Avoiding
Warning Symbol
The Air Knife will become hot and could cause
burns to the skin
Do NOT touch while machine is in operation or
immediately after use, allow to cool.
Burning fingers at operating temperature
in the Air Knife FT1555-BM230 176˚C 350°F
Do NOT stick fingers into the Air Knife while in use.
