© Danfoss
FT1380 Crimp Machine Operator’s Manual
4 | © Danfoss FT1380 Crimp Machine Operator’s Manual | 2022.12.
AQ435955684211en-000101
Specifications
Specifications
Electrical Requirements
FT1380-115
115-Volt AC single phase (50/60) Hz
Circuit with a minimum of 20 amps
FT1380-230
208 to 230-Volt AC single phase (50/60) Hz
Circuit with a minimum of 15 amps
Crimp Machine Dimensions
Width
14.25 inches
Depth
25.75 inches
Height
28.50 inches
Weight
238 pounds
Production Capacity
Danfoss braided and spiral hydraulic hoses which use TTC/Z or 4S/6S series
hose ends through -20 size.
Setup and Installation
1.
Mount your Danfoss FT1380 crimp machine onto a workbench that
will support at least 300 pounds. Secure the unit using the holes
provided in the corners of the crimp machine base.
2.
Remove the plug from the hydraulic reservoir vent port and replace it
with the vent cap that is supplied with the unit.
3.
CAUTION:
Failure to do so will cause cavitation and damage to
the pumping mechanism. Hand tighten the vent cap.
CAUTION:
Provide electrical service with a dedicated circuit (per the
crimp machine electrical requirements) to eliminate the possibility of a
low-voltage situation.
4.
Never use an extension cord, always plug directly into the power
outlet.
!
Accessories
Die Cage Repair Kits
Die cage repair kits for FT1380-200-size, FT1380-275-size.
Part number.............................................................. FT1380-2-9
Die Holder Kit
A set includes four plates and mounting hardware that can hold up to
eight die cages. This kit attaches to the sides of the Danfoss FT1380 crimp
machine.
Part number.............................................................. FT1380-2-4
Optional Fitting Backstop
Part number.............................................................. FT1380-4
TTC/Z Series Fitting Locators
Part number.............................................................. FT1330-XL
4S Series Fitting Locators (cannot be used in combination with
FT1330-XL locators)
Part number.............................................................. FT1380-XL
Die Cages
Part number............................................................... FT1380-275-M070
........................................................................................... FT1380-275-M090
........................................................................................... FT1380-275-M120
........................................................................................... FT1380-200-M150
........................................................................................... FT1380-200-M180
........................................................................................... FT1380-200-M210
........................................................................................... FT1380-200-M240
........................................................................................... FT1381-200-M280
........................................................................................... FT1380-200-M320
........................................................................................... FT1380-200-M370
........................................................................................... FT1380-200-M420
........................................................................................... FT1382-200-M465
........................................................................................... FT1382-275-M520
