Danfoss
FT1330 Crimp Machine Operator’s Manual
22 | © Danfoss FT1330 Crimp Machine Operator’s Manual | 2023.02.
AQ439269212774en-000101
Maintenance
1. Sliding surfaces must be kept free of dirt and other abrasive materials.
2. Surfaces of crimp dies and the crimp ring where metal to metal contact is made should be lubricated with high efficiency PTFE grease
(Danfoss part number T-400-G) at the beginning of each production run or as required during production (minimum of once per 25
crimps, and more often with larger hose).
3. All exposed black metal surfaces should be coated occasionally with a light film of oil to prevent corrosion.
4. The oil level in the fluid reservoir of the hydraulic power until should be checked periodically and maintained at a level one inch
below the top of the reservoir. Note: The crimp die cage should be retracted fully when the oil level is checked. Add SAE 10 weight
hydraulic oil as necessary.