Danfoss FT1330 Crimp Machine Operator’s Manual
AQ439269212774en-000101
© Danfoss FT1330 Crimp Machine Operator’s Manual | 2023.02. | 19
Operating / Assembly Instructions
Thermoplastic Style (1 piece fitting)
STEP 5 - POSITION THE FITTING -03 THRU -08 SIZE
LOCATE THE HOSE AND FITTING IN THE CRIMPER SO THAT THE
BOTTOM OF THE PART NUMBER ON THE SOCKET IS ALIGNED WITH
THE BACK OF THE DIE AS SHOWN. IF USING THE LOCATOR SYSTEM,
REFER TO THE OWNERS MANUAL.
STEP 6 - CRIMP THE ASSEMBLY
TURN THE MACHINE ON AND DEPRESS THE FOOTSWITCH. THE DIES
WLL AUTOMATICALLY CRIMP THE FITTING TO THE PRESET DIMENSION.
ONCE THE FOOTSWITCH IS RELEASED, AFTER THE FULL CRIMPING
STROKE, THE DIES WILL RETURN. IF THE FOOTSWITCH IS RELEASED
BEFORE THE FULL CRIMP STROKE IS COMPLETED, THE DIES WILL STOP
AND CAN ONLY BE RETURNED BY PUSHING THE JOG RETURN SWITCH.
STEP 5A - POSITION THE FITTING -10 AND -12 SIZE
LOCATE THE HOSE AND FITTING IN THE CRIMPER SO THAT THE END OF THE
SOCKET IS ALIGNED WITH THE FRONT OF THE DIE AS SHOWN. IF USING
THE LOCATOR SYSTEM, REFER TO THE OWNERS MANUAL.
STEP 7 - CHECK YOUR WORK!
NOTE: IF USING THE LOCATOR SYSTEM. LOOSEN THE HAND KNOB
AND SLIDE THE LOCATOR ASSEMBLY FORWARD OR BACK UNTIL THE
POSITION OF THE SOCKET IS CORRECT WHEN HELD AGAINST THE
LOCATOR. LOCK THE LOCATOR IN POSITION BY TIGHTENING THE
HAND KNOB.