•
For Windows XP and older Windows
versions: http://invertername, where
'invertername' is the final 10 digits of
the serial number.
•
For Windows 7 and newer Windows
versions: http://IP address. The IP
address can be found in the display.
It is not possible to use the installation wizard with
Windows 7 and 8.
Find the serial number marked on the product label on the
side of the inverter enclosure. See
Illustration 1.2
.
1.
The web interface logon dialog opens.
2.
Type 'admin' in the user and password fields, and
click ‘Log in’.
3.
At initial logon the inverter runs a setup wizard.
3.3.3 Setup Wizard
Step 1 of 8: Display language
Select display language.
•
The default language is English.
NOTICE
This selection defines the language in the display, not
the grid code.
Illustration 3.11 Step 1 of 8: Display Language
To change the language setting later, go to [Setup
→
Setup Details].
Step 2 of 8: Master setting
To set up a master inverter, click on ‘Set as master’.
•
A scan runs to identify inverters in the network.
•
A pop-up window shows the inverters successfully identified.
Click [OK] to confirm that the correct number of inverters has been found.
Initial Setup and Start
L00410568-02_02 / Rev. date: 2013-12-10
21
3
3
