10
VI.CU.C2.02
Produced by Danfoss Floor Heating Hydronics 05.2011
Instruction FH-CWP Thermostat
in the display.
• When releasing the or Fig. 1
the display
returns to showing the actual room temperature
.
This temperature change is only temporary and
will be maintained only until the next programmed
setting!
7. Choosing room temperature
control or both room and floor
temperature control
Turn OFF the thermostat by pressing Fig. 1
.
• Press Fig. 1
and Fig. 1
for 10 seconds. The
display will show 01.
• Press Fig. 1
to adjust desired controltype.
01=room temperature control, only with room
sensor, no floor sensor, check and setting only room
temperature.
02=both room and floor temperature control, with
room sensor and floor sensor, check and setting room
temperature and maximum floor temperature limit.
Factory setting is 01.
Содержание FH-CWP
