Danfoss ET9400, Руководство оператора

Страница: 28 / 50

•
The work piece must protrude over the two bending pins by at
least 50 mm.
•
The work piece must completely bear on the cutting plate.
5.3.2 Hose cutting
WARNING!
Cutting risk!
There is a risk of cutting your extremities when cutting work-
pieces.
• When moving the handle, take care that your extremities are
not between the retractable fork and the knife protection.
1. Manually place the workpiece on the cutting plate (4) in front of
the bending pins (3).
2. Activate the machine at the main power switch (5).
3. Pull hand lever (1) consistently and slowly.
4. The retractable fork (2) guides the workpiece towards the knife.
The cutting process is completed.
5. Move the hand lever (1) upwards into the starting position.
6. Deactivate the machine at the main power switch (5).