![background image](http://html1.mh-extra.com/html/danfoss/et5025/et5025_operators-manual_3418811021.webp)
Data records may be saved in the item memory and recalled at any
time in the control system. Depending on the operation mode, the ac-
tual forming process is controlled via the buttons on the control panel
(5), the depth stop or the dual foot switch.
Crimping tool
The die system comprises basic dies and crimping dies.
All basic dies (4) are supported on sliding plates (3). The crimping
dies (1) are plugged onto the basic dies (4).
After the forming process, the basic dies (4) are pressed apart by the
springs (5) when the tool opens. The holding plates (2) guide the
basic dies axially in the tool.
3.2 Accessories
The machine may be fitted with accessories. A list of the available ac-
cessories is included in the Annex, Section "Accessories".
Содержание ET5025
