Danfoss ET5020, Руководство оператора

Страница: 35 / 92

WARNING!
Risk by tilting machine!
If not bolted to the floor, the machine may tilt. There is a risk of
being injured.
• Fix the machine on the floor.
2. Use suitable bolts to fix the machine legs on the floor.
Place the machine in a way so that it is easily accessible for main-
tenance work from all sides.
3. Check the machine for damage.
4. Check the electric cables for damage.
5. Train the operating staff and record training
sessions in “Decla-
ration of trained staff”, Section 9.
WARNING!
Risk of injuries!
Machine components might loosen during transport. Such com-
ponents might be flung out during to the forming process. There
is a risk of being injured.
• Open and close the machine several times without any work-
piece.
• Check the machine for atypical noise.
4.3.1 Filling hydraulic oil
If the UNIFLEX forming machine was purchased without hydraulic oil
filling, the appropriate new, clean and pre-filtered hydraulic oil has to
be filled before commissioning (for oil type, please refer to "Technical
data" in Section 3).