![background image](http://html1.mh-extra.com/html/danfoss/et4500-002/et4500-002_operators-manual_3414505056.webp)
5.10 Emergency stop
In case of an emergency
Immediately press the emergency-stop button (1) in cases of
emergency. The crimping tool movement will be stopped. The drive
unit is shut down.
Restart after and emergency
WARNING!
Risk of injuries!
The emergency-stop button was probably activated due to the
occurrence of a hazardous situation. A restart of the machine
may cause injuries if the hazardous situation has not yet been
remedied!
• Remedy the hazardous situation before a restart.
1.
Remedy the cause of the emergency stop.
2.
Unlock the emergency-stop button.
3.
Reset the error messages on the control.
5.11 Cleaning
ATTENTION!
Risk of damage to machinery!
If the machine is cleaned with a steam jet or compressed air, dirt
and water may ingress in the machine and cause serious da-
mage.
• Do not use a steam jet to clean the machine.
• Do not use compressed air to clean the machine.
Содержание ET4500-002
