ITE - Sint-Niklaas - Belgium - Fax : +32 3 766 10 67 - [email protected]
ATW-06-0
Adj.Torq.Wrench 6 diff.mm sizes
Instruction manual
General :
1. Hold the wrench so that the direction arrow and the scale are visible.
2. Unlock the handle by turning the locking pin (at the end of the handle) counter
clockwise.
3. Turn the handle clockwise up to the desired value on the scale.
4. How to adjust the scale correctly:
- For 10 - 18 - 42 Nm: slowly turn the handle until the mark ‘10’, ‘18’ or ‘42’ on the
handle coincides with its respective vertical line of the scale.
- For 55 - 65 - 75 Nm: slowly turn the handle until the mark ‘0’ on the handle
coincides with the vertical line of the scale.
Value to set
Mark on the vertical scale
Mark on the
handle
100 kg x cm (10 Nm)
10
10
160-180 kg x cm (16-18 Nm)
16-18
16-18
420 kg x cm (42 Nm)
42
42
550 kg x cm (55 Nm)
55
0
650 kg x cm (65 Nm)
65
0
750 kg x cm (75 Nm)
75
0
