Danfoss ET4500-002, Руководство оператора

Страница: 55 / 96

machines without any forming distance limitation, tools components
may be damaged if the forming range is exceeded.
5.9 Stop
1. Complete the forming process.
2. Deposit the work piece outside the machine.
3. Deactivate the main switch (1).
4. Check the machine for contamination, leaks and external da-
mage.
5. Check the crimping tool and retaining bolts for contamination,
damage and secure fitting.
6. Check the oil level.
7. Remove contamination, dust and chips using a vacuum.
Inform the fitter in case of damage or other irregularities.