5
Operation
5.1 What you have to observe
The operator has received the Operation Manual from the owner, has
read and understood it and will observe it.
Before starting and/or re-starting
•
Ensure sufficient illumination of the working area of the ma-
chine/unit.
During operation
•
Observe the safety instructions on the machine/unit.
•
Make sure that no other persons stay in the working area.
•
Use appropriate aids to handle heavy workpiece.
•
Each movement of the hand must be observed.
•
The control cabinet must be closed securely.
•
Eating, drinking and smoking at the workplace is prohibited.
•
Wear close-fitting clothes.
•
Do not wear watches or jewellery.
5.2 Start
1.
Connect the power cable to the power grid (see “Electrical
connection” in Section 4).
5.3 Forming the workpiece
5.3.1 Prerequisites
Prerequisites for a correct forming process:
•
The die system and the workpiece are compatible.
•
The proper jaw system is correctly mounted in the tool.
•
The forming dimension is set correctly, please also refer to “Set-
ting the forming dimension”, Section 5.
Содержание ET4350
