Danfoss ET4100, Руководство оператора

Страница: 33 / 60

2. Select crimping dies with a smaller or the same diameter, e.g.
Ø 17 mm,
3. Place the crimping dies in the tool.
4. Set the control and/or micrometer to the requested dimension:
Control system: Forming dimension diameter
Micrometer : Workpiece forming dimension less crimping die di-
ameter
5. Form the workpiece.
6. Check the workpiece.
7. If the dimension is reached: manufacture other identical workpie-
ces.
8. If the dimension is not reached: Adjust difference on control
and/or in the micrometer, repeat the forming process and check
the workpiece.
5.5 Completing the forming process
1. Complete the forming process.
2. Deposit the work piece outside the machine.
3. Check signal lamp function by pressing the pushbutton.
4. Check the machine for contamination, leaks and external dam-
age.
5. Check the crimping tool and retaining bolts for contamination,
damage and secure fitting.
6. Check the oil level.
7. Remove contamination, dust and chips using a vacuum.
Inform the fitter in case of damage or other irregularities.
Close the oil filling / bleed screw for transport.