Danfoss ECtemp Smart, Руководство по установке

Страница: 11 / 24

Danfoss ECtemp™ Smart
11 Installation Guide
the female header, in not to bending the connectors.
Press carefully until the frame is fixed against the
rubber gasket.
When mounting and reassembling the thermostat.
Important:
Do NOT press in the center of the display screen.
Press your fingers under the side of the front part and pull
toward you until it releases from the snap lock:
To ensure that the batteries are fully charged, the ther-
mostat shall be connected to main supply for minimum
15 hours. The current time and day is kept for 24 hours if
mains supply is off.
All other settings are stored permanently.