![background image](http://html1.mh-extra.com/html/danfoss/ectemp-550/ectemp-550_installation-manual_3570258008.webp)
Do not place the thermostat in a way that
it will be exposed to direct sunlight.
Note: A floor sensor enables a more accu-
rate temperature control and is recom-
mended in all floor heating applications
and mandatory under wooden floors to
reduce the risk of over-heating the floor.
▪
Place the floor sensor in a conduit in an appropriate
place where it is not exposed to sunlight or draft
from door openings.
▪
Equally distant and >2cm from two heating cables.
▪
The conduit should be flush with the floor surface -
countersink the conduit if necessary.
▪
Route the conduit to the connection box.
▪
The bending radius of the conduit must be min
50mm.
ECtemp 550
8
Installation Guide
Содержание ECtemp 550
Страница 22: ...ECtemp 550 22 Installation Guide...