Danfoss ECdry 100, Руководство по установке

Страница: 12 / 28

12 | Danfoss © | 2020.07 AN324050550815en-000201
Installation Guide Danfoss ECdry Touch Kit
Installing Supply Cord or Extension Cords:
The cords must only be placed in the filler
material and not over/in the heating element.
The filler material shall be cut so it envelopes
the cords. The ECdry X can withstand maxi-
mum 10 A.
Make sure that no hot spots develop when
using the floor heating system. Avoid hot
spots by ensuring that the heat from the floor
heating is homogeneously released to the
area you wish to heat and that there is free
space (ventilation) under the furniture.
When designing the layout, make sure not
to install ECdry heating element under per-
manent or built-in cupboards or fire places/
ovens. ECdry have to be separated from
other heat sources such as chimneys. Instead
ECdry filler material should be used.
Element size Standard length Minimum length
1 m² 1 m 0,5 m
2 m² 2 m 1,5 m
3 m² 3 m 2,5 m
4 m² 4 m 3,5 m
5 m² 5 m 4,5 m
1 m wide filler materials without heating (1, 2 and 4 m)