Installation Guide
ECA 30 / 31 for ECL Comfort 210 / 210B / 310 / 310B
3.0 Installation
3.1 Important safety and product information
3.1.1 Important safety and product information
This Installation Guide is associated with the Remote Control Units
ECA 30 (code no. 087H3200) and ECA 31 (code no. 087H3201).
ECA 30 is a remote control unit with room temperature sensor.
ECA 31 is a remote control unit with room temperature sensor and
relative humidity sensor.
ECA 30 and ECA 31 can be used with ECL Comfort 210 / 210B and
ECL Comfort 310 / 310 B controllers.
For information on general functions please consult the installation
guide for the application key in question.
Additional documentation for ECL Comfort 210 and 310, modules
and accessories is available on
www.ecl.doc.danfoss.com.
Safety Note
To avoid injury of persons and damages to the device, it is absolutely
necessary to read and observe these instructions carefully.
Necessary assembly, start-up, and maintenance work must be
performed by qualified and authorized personnel only.
The warning sign is used to emphasize special conditions that should
be taken into consideration.
This symbol indicates that this particular piece of information should
be read with special attention.
As this Installation Guide covers several system types, special system
settings will be marked with a system type. All system types are shown
in the chapter: 'Identifying your system type'.
°C (degrees Celsius) is a measured temperature value whereas K
(Kelvin) often is used for temperature differences.
10
DEN-SMT/DK
VI.GU.V1.02
Danfoss District Energy
