manualshive.com logo in svg

Danfoss EC-C1700B-420, Руководство пользователя

Поделиться
Скачать
Danfoss EC-C1700B-420 Скачать руководство пользователя страница 32

Auxiliary circuit measurement

Mechanical installation

Allowed mounting position

Do not place the electric device on the ground without proper mounting or protective

structure. 

The electric device must be mounted in a way that no other object or structure, which can

cause compression, pull, torsion, rotation etc., touches the enclosure of the electric device. In

addition, the electric device should not be used to support any other structure of the system.

•

The electric device must be mounted on a flat, heat- and flame-resistant mounting place (for example
on a bracket).

•

The electric device can be mounted in any direction. Mount the electric device permanently
from the mounting points.

•

To fulfill the mechanical and environmental standards, for example vibration and shock, it is
recommended to mount the electric device from the bottom side, with at least 6 pcs of M8 screws.

•

Mounting points are shown in the Figure below.

User Guide

EC-C1700B-420

Installation

 

32 | 

©

 Danfoss | June 2023

BC454142332191en-000101

Содержание EC-C1700B-420











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды