Danfoss DTW 300 SP, Инструкция по установке, обслуживанию и эксплуатации

Страница: 27 / 41

Press the UP or DOWN key to adjust the hour setting.
Press the TIME ON key again and wait about 10 seconds. The flashing stops and the TIME
ON setting is completed.
11.1.6 Cancelling the timer
CANCEL
In an unlocked state, press the CANCEL key 1 second and the TIME ON function will be can-
celled.
11.1.7 Setting both Time ON and TIME OFF
By using both the TIME ON and TIME OFF functions, the user can set a desired start and stop time for the unit.
When the start time is set before the stop time, the unit will run between these time settings. When the start time
is later than the stop time, the unit will run between the start time the same day and the stop time the next day.
If the user tries to set the same value for both start time and stop time, the stop time will automatically be delayed
by ten minutes. For example, if the user sets both TIME ON and TIME OFF to 01:00, TIME OFF will automatically be
adjusted to 01:10.
Note!
•
The TIME OFF function cannot be used alone. The function can only be used after TIME ON has been
set. User can press the on/off key manually beyond the timer range.
TIME
ON
Press the TIME ON key, the minute digit of the clock on the display starts flashing slowly.
Installation, Service and User Manual VMGFK202 – 25