11.1.5
Sub menu INSTALLATION
Table 12.
Used for settings that are set during installation.
Menu selec-
tion
Meaning
Factory setting
SYSTEM
Sub menu SERVICE -> INSTALLATION -> SYSTEM:
Note! The menu selection in the SYSTEM menu varies depending on the selected values.
Tip: start in the top menu and work downwards.
Menu selection
Meaning
HEAT SOURCE
Menu selection
Meaning
DIRECT EVAP.
The actual system with direct evaporation and four-
way valve.
POOL (Expansion
card)
ON /
Does not appear if SHUNT GROUP is selected.
SHUNT GROUP
ON /
When ON, HEAT CURVE 2 is activated in the INFORMATION menu. Not displayed if
POOL is selected.
BUFFER TANK (See
separate instruction
for buffer tank)
BUFFER TANK
NO. OF CIRCUITS
SYSTEM SHUNT
2ND H.C SHUNT
ADDITION
0-10V:
(Expansion card)
CURRENT LIMITER: ON /
(Expansion card)
SERVICE TIME
Note! Only used for test operation. The heat pump counts 60 times
as fast, which means that the waiting times are eliminated during
test operation.
0 = deactivates SERVICE TIME
1 = activates SERVICE TIME, which speeds up the control system’s integral calcula-
tion and start delay by 60 times.
-
FACTORY SET
CANCEL = starting point, no changes made.
RADIATOR = reset factory settings for radiator system
FLOOR = reset factory settings for under floor heating
-
RESET OPER.
TIME
0 = no reset of operating times
1 = reset of operating times to zero
-
Installation instructions
VMIFJ102
– 35
Содержание DHP-S&DP
Страница 1: ...Installation instruc tions DHP S DP VMIFJ102 ...
Страница 4: ......