Danfoss DHP-AT, Руководство пользователя

Страница: 14 / 24

4. Use
or buttons to select a new heating curve (range is 24-50).
5. Press
again and wait 5 seconds.
Desired room temperature
1. To select the initial desired room temperature, press
for 5 seconds.
2. Use
or buttons to navigate to Menu 01.
3. Press
again.
4. Use
or buttons to select the initial desired room temperature.
5. Wait 5 seconds for the change to be saved.
7.5 Setting current time
1. To change the default time setting, press
.
2. While the symbols are flashing adjust the default hour setting by using the
or buttons.
3. Press
again.
4. Use
or buttons to change the default minute setting.
5. Before the flashing stops, press
again or wait 5 seconds to save the settings.
7.6 Timer settings
The heat pump can start and stop according to timer settings in the control system.
Setting Timer ON
1. To set Timer ON, press
.
2. Use
or buttons to change the default hour setting for Timer ON.
3. Press
again.
4. Use
or buttons to change the default minute setting for Timer ON.
5. Press
before the flashing stops or wait 5 seconds.
Setting Timer OFF
1. To set Timer OFF, press
.
2. Use
or buttons to change the default hour setting for Timer OFF.
3. Press
again.
4. Use
or buttons to to change the default minute setting for Timer OFF.
5. Press
before the flashing stops or wait 5 seconds.
Cancelling Timer settings
User Guide DHP-AT
VUGFC20202 Danfoss Heating Solutions
14