Danfoss DEVIreg 316, Руководство по установке

Страница: 7 / 16

DEVIreg™ 316
7 Installation Guide
The screen of the heating cable must be connected to
the earth conductor of the power supply cable by
using a separate connector.
Note: When you use the wire sensor for floor heating,
always install the sensor in a conduit.
3. Turn on the power supply.
Protective separation
The thermostat is designed so that the sensor circuit is gal-
vanically separated from the high voltage part which means
that the sensor part is regarded as a low voltage part.
3 Settings
A
B
C
Night set-back
Minimum tempera-
ture limiter
Hysteresis
3 1 Hysteresis
When the thermostat is used to apply with either heating
systems or refrigerating systems, and the requested