Danfoss CF-RC, Инструкция по установке и эксплуатации

Страница: 14 / 20

CFRC REMOTE CONTROLLER 14
GB
Activating this Alarms menu with OK provides access to an Alarm
status where you can see a description of the error causing the alarm
furthermore, you can select the Alarm log to get specifi c information
about the error causing the alarm and the time for its registration
by the system. This
Alarm log saves the latest alarms for later access
and easy system failure identifi cation. When no error is causing an
alarm, you can access the Alarm log through the Setup menu (see
chapter 5.3).
6.0 Uninstallation
Resetting the Remote Controller, CF-RC – fi g 1 :
• At the same time, activate the Soft key 1
d
, the soft key 2
e 6
and
the down selector
f
.
• The Remote Controller requests confi rmation before resetting.
Confi rmation with “yes” Resets the Remote Controller.
• By
confi rming Reset with “yes” the Remote Controller is now ready
for installation to a Master Controller, CF-MC.
Note: Please see the Master Controller instruction for further details.
7.0 Other products for the CF2 system
and
abbreviations
Other products for the CF2 system - fi g. 5
a) Master Controller, CF-MC: MC
b) Room Thermostat, CF-RS, -RP, - RD and -RF: Room T.
c) Repeater Unit, CF-RU: RU
8.0 Specifi cations
Cable length (power supply) 1.8m
Transmission frequency 868.42MHz
Transmission range in buildings (up to) 30m
Number of Repeater Units in a chain (up to) 3
Transmission power < 1mW
Supply voltage 230V a.c.
Ambient temperature 0-50°C
IP class 21