Danfoss BOCK UL-HGX24 CO2 T Series Скачать руководство пользователя

Страница: 4 / 38

D
US

4 | AQ450437934291en-US0301

Safety

1.1

Identification of safety instructions:

Indicates a dangerous situation which, if not avoided, will cause
immediate fatal or serious injury.

Indicates a dangerous situation which, if not avoided, may cause
fatal or serious injury.

Indicates a dangerous situation which, if not avoided, may immedi-
ately cause fairly severe or minor injury.

Indicates a situation which, if not avoided, may cause
property damage.

Important information or tips on simplifying work.

1.2 General safety instructions

Risk of accident.
Refrigerating compressors are pressurized machines and therefore
require particular caution and care in handling.
The maximum permissible overpressure must not be exceeded, even for
testing purposes.

Danger of suffocation!
CO

is a nonflammable, acidic, colorless and odorless gas

and

heavier than air.

Never release significant volumes of CO

or the entire contents of the

system into closed rooms!
Safety installations are designed or adjusted in accordance with EN 378
or appropriate national safety standards.

Risk of injury!

Only compressors with LSPM Motor: When the compressor is open,

there is danger from a strong magnetic field.

See also Chapter 7, Maintenance.

Risk of burns!
• Depending on the operating conditions, surface temperatures of over

140°F (60°C) on the pressure side or below 32°F (0°C) on the suction
side can be reached.

• Avoid contact with refrigerant under any circumstances. Contact

with refrigerant can lead to severe burns and skin irritations.

Содержание BOCK UL-HGX24 CO2 T Series







































Результаты поиска

Содержание BOCK UL-HGX24 CO2 T Series

Отзывы:

Похожие инструкции для BOCK UL-HGX24 CO2 T Series

Бренды по названию

Популярные бренды

Danfoss BOCK UL-HGX24 CO2 T Series, Руководство по эксплуатации

Результаты поиска

Содержание BOCK UL-HGX24 CO2 T Series

Отзывы:

Похожие инструкции для BOCK UL-HGX24 CO2 T Series

Бренды по названию

Популярные бренды