Danfoss AK-CC55, Руководство по установке, Страница: 15 / 16

Fault message
In an error situation the alarm LED on the front will be on and the alarm relay will be activated (depending on priority).
If you push the alarm button for 3 seconds you can see the alarm report in the display.
(Alarm priorities can be changed. See the User Guide.)
Here are the messages that may appear:
Code / Alarm text via data
communication Description Alarm relay groups
(P41)
A1/--- High t.alarm
High temperature alarm
1
A2/--- Low t. alarm
Low temperature alarm
2
A4/--- Door alarm
Door alarm
4
A5/--- Max. hold time
The ”o16” function is activated during a coordinated defrost
5
A11/--- No Rfg. sel. No refrigerant selected 7
A15/--- DI1 alarm DI1 alarm 4
A16/--- DI2 alarm DI2 alarm 4
A45/--- Standby mode Standby position (stopped refrigeration via r12 or DI input) 8
A59/--- Case clean Appliance cleaning. Signal from DI input 8
AA2/ ---Refrig Leak A refrigerant leak detection signal is received 9
AA3/--- CO2 alarm A refrigerant leak detection signal is received and the selected refrigerant is CO2 9
a04/--- Wrong IO cfg The configuration of inputs and outputs is incorrect 6
--- Max. Def.Time (A,B) Defrost stopped based on time instead of, as wanted, on temperature. Section A / B 5
E1/--- Ctrl. error Faults in the controller 6
E6/--- RTC error Check clock 6
E20/--- Pe error Error on pressure transmitter Pe 3
E24/--- S2 error Error on S2 sensor 3
E25/--- S3 error Error on S3 sensor 3
E26/--- S4 error Error on S4 sensor 3
E27/--- S5 error Error on S5 sensor 3
Data communication
The importance of individual alarms can be defined with a setting. The setting must be carried out in the group "Alarm destinations"
© Danfoss | DCS (vt) | 2019.10 AN300028324304en-000401 | 15