AK-CC
550B
Manual RS8GL302 © Danfoss 2016-03
3
Applications
Here is an overview of the controller’s usage options.
A setting will configure input and outputs so that the controller’s
operation interface is directed at the selected application.
The current settings for the respective uses can be found on page
28.
Application 1-8
These uses are applied to standard appliances or cold storage
rooms with one valve, one evaporator and one refrigeration sec-
tion.
The sensors are used according to standard principles.
The output functions change depending on the selected applica-
tion.
Application 9
This use is for refrigeration appliances with one valve, two evapo-
rators and two refrigeration sections, each with its own tempera-
ture measurement.
There are shared alarm limits but individual alarm delays for each
cooling section.
Display for each section.
Product sensor S6 cannot be used.
Application 10
This use is for refrigeration appliances with one valve, one evapo-
rator and two refrigeration sections.
There are separate alarm limits and alarm delays for each cooling
section.
Display for each section.
Software opdatering
AK-CC 550B was updated at the end of 2012 to software version
1.6.
The update applies primarily to applications 6, 9 and 10.
The previous version (software version 1.2) is described in
literature number RS8GL102:
