background image

AHF 005/010

Measurements,

dimensions

1. General

During operation, filter module units may have,

according to their type of protection, live, bare,

in some cases also movable or rotating parts

as well as hot surfaces.

Unauthorized removal of the required cover,

inappropriate use, or incorrect installation or

operation creates the risk of severe injury to persons

or damage to material assets.

Further information can be obtained from

the documentation.

All operations concerning transport, installation, and

commissioning as well as maintenance must be

carried out by qualified, skilled personnel (IEC 364 and

CENELEC HD 384 or DIN VDE 0100 and IEC-Report

664 or DIN VDE 0110 and national regulations for the

preventions of accidents must be observed).

According to this basic safety information, qualified

skilled personnel are persons who are familiar with

the erection, assembly, commissioning, and operation

of the product and who have the qualifications

necessary for their occupation.

2. Application as directed

Filter modules are components designed for installation

in electrical systems or machinery.

When installing in machines, commissioning of

the filter modules (i.e. the starting of operation

as directed) is prohibited until it is verified that the

machine corresponds to the regulations of the

EC Directive 83/392/EEC (Machinery Directive);

EN 60204 must be observed.

Commissioning (i.e. starting operation as directed)

is only allowed when there is compliance with

the EMC-Directive 89/336/EEC.

The filter modules meet the requirements of the

Low-Voltage Directive 73/23/EEC. The technical data

and information on the connection conditions must be

obtained from the nameplate and the documentation

and must be observed in all cases.

3. Transport, Storage

Notes on transport, storage, and appropriate

handling must be observed.

The filter modules must be protected from inadmissible

stress. In particular, during transport and handling no

components may be bent, and isolating distances

may not be altered. The units are equipped with

electrostatic-sensitive devices, which may be damaged

by improper handling. Therefore contact with

electronic components must be avoided. If electronic

components are damaged mechanically, the unit must

not be put into operation, as it cannot be ensured that

all relevant standards are observed. Climatic conditions

must be observed according to prEN 50178.

4. Installation

The devices must be erected and cooled according to

the regulations of the corresponding documentation.

The filter modules must be protected against

inappropriate loads. Particularly during transport and

handling, components must not be bent and / or

isolating distances must not be changed. Touching of

electronic components and contacts must be avoided.

Filter modules contain electrostatic-sensitive

components, which can easily be damaged by

inappropriate handling. Electrical components

must not be damaged or destroyed mechanically

(health risk are possible!).

5. Electrical Installation

When working on live filter modules, the valid

national regulations for the prevention of accidents

(e.g. VBG 4) must be observed. Before any

installation or connection works, the plant must

be switched off and secured properly.

The electrical installation must be carried out

according to the appropriate regulations (e.g. cable

cross-sections, fuses, PE-connection). More detailed

information is included in the documentation. When

using the filter module with adjustable frequency

drives without safe separation from the supply line

(to VDE 0100), all control wiring must be included in

further protective measures (e.g. double insulated

or shielded, grounded and insulated).

MG.80.B4.22 - VLT is a registered Danfoss trademark

21

Содержание AHF 005























Отзывы: