0-20 Display Line 1.1 Small
Option:
Function:
[2118]
Ext. 1 Feedback
[Unit]
The value of the feedback signal for
extended Closed Loop Controller 1
[2119]
Ext. 1 Output [%]
The value of the output from
extended Closed Loop Controller 1
[2137]
Ext. 2 Reference
[Unit]
The value of the reference for
extended Closed Loop Controller 2
[2138]
Ext. 2 Feedback
[Unit]
The value of the feedback signal for
extended Closed Loop Controller 2
[2139]
Ext. 2 Output [%]
The value of the output from
extended Closed Loop Controller 2
[2157]
Ext. 3 Reference
[Unit]
The value of the reference for
extended Closed Loop Controller 3
[2158]
Ext. 3 Feedback
[Unit]
The value of the feedback signal for
extended Closed Loop Controller 3
[2159]
Ext. 3 Output [%]
The value of the output from
extended Closed Loop Controller 3
[2230]
No-Flow Power
The calculated No Flow Power for
the actual operating speed
[2580]
Pack Status
Status for the operation of the Pack
Controller
[2581]
Compressor Status Status for the operation of each
individual compressor controlled by
the Pack Controller
0-21 Display Line 1.2 Small
The options are the same as those listed for par 0-20
Display Line
1.1 Small
Option:
Function:
Select a variable for display in line 1, middle
position.
0-22 Display Line 1.3 Small
The options are the same as those listed for par 0-20
Display Line
1.1 Small
Option:
Function:
Select a variable for display in line 1, right
position.
0-23 Display Line 2 Large
The options are the same as those listed for par 0-20
Display Line
1.1 Small
Option:
Function:
Select a variable for display in line 2.
0-24 Display Line 3 Large
The options are the same as those listed for par 0-20
Display Line
1.1 Small
Option:
Function:
Select a variable for display in line 3.
0-37 Display Text 1
Range:
Function:
0
N/A
*
[0 -
0
N/A]
In this parameter it is possible to write an
individual text string for display in the LCP or to be
read via serial communication. If to be displayed
permanently select Display Text 1 in
0-20 Display
Line 1.1 Small
,
0-21 Display Line 1.2 Small
,
0-22 Display Line 1.3 Small
,
0-23 Display Line 2 Large
or
0-24 Display Line 3 Large
. Use the
▲
or
▼
buttons on the LCP to change a character. Use the
◀
and
▶
buttons to move the cursor. When a
character is highlighted by the cursor, it can be
changed. Use the
▲
or
▼
buttons on the LCP to
change a character. A character can be inserted by
placing the cursor between two characters and
pressing
▲
or
▼
.
0-38 Display Text 2
Range:
Function:
0
N/A
*
[0 -
0
N/A]
In this parameter it is possible to write an
individual text string for display in the LCP or to
be read via serial communication. If to be
displayed permanently select Display Text 2 in
0-20 Display Line 1.1 Small
,
0-21 Display Line 1.2
Small
,
0-22 Display Line 1.3 Small
,
0-23 Display Line
2 Large
or
0-24 Display Line 3 Large
. Use the
▲
or
▼
buttons on the LCP to change a character. Use
the
◀
and
▶
buttons to move the cursor. When a
character is highlighted by the cursor, this
character can be changed. A character can be
inserted by placing the cursor between two
characters and pressing
▲
or
▼
.
0-39 Display Text 3
Range:
Function:
0
N/A
*
[0 -
0
N/A]
In this parameter it is possible to write an
individual text string for display in the LCP or to
be read via serial communication. If to be
displayed permanently select Display Text 3 in
0-20 Display Line 1.1 Small
,
0-21 Display Line 1.2
Small
,
0-22 Display Line 1.3 Small
,
0-23 Display Line
2 Large
or
0-24 Display Line 3 Large
. Use the
▲
or
▼
buttons on the LCP to change a character. Use
the
◀
and
▶
buttons to move the cursor. When a
character is highlighted by the cursor, this
character can be changed. A character can be
inserted by placing the cursor between two
characters and pressing
▲
or
▼
.
0-70 Set Date and Time
Range:
Function:
0 N/A
*
[0 - 0 N/A] Sets the date and time of the internal clock.
The format to be used is set in
How to Programme the Frequ...
ADAP-KOOL
®
Drive Operating Instructions
68
MG.11.L4.02 - ADAP-KOOL
®
Drive
7
7
