manualshive.com logo in svg

Danfoss ADAP-KOOL AK-LM 340, Руководство пользователя, Страница: 55 / 92

Поделиться
Скачать
Danfoss ADAP-KOOL AK-LM 340 Скачать руководство пользователя страница 55

AK-LM 340 

RS8GV202 © Danfoss 2016-06 

55

The controller can only be configured when it is unlocked.

The values can be changed when it is locked, but only for those settings 

that do not affect the configuration.

3 -  Thermostats

The general thermostats can be used for thermo-

stat functions with relay output.

The function can be connected to alarm limits 

and alarm texts.

For each thermostat set / readout

 

• Name

• Which of the sensors is used

• Actual temp

.

Temperature measurement on the sensor that is 

attached to the thermostat

• Relay

Define whether a relay will be used for this func-

tion. 

• Actual state

Actual status on the thermostat outlet

• Cut out temp.

Cut-out value for the thermostat

• Cut in temp.

   

Cut-in value for the thermostat

• Cut out delay

• Cut in delay

• DI-input for defrost interlock

DI signal, which will change the delay time to 

“High Alarm delay 2” 

• DI input for omitting alarms 

If a signal is received, all alarms will be omitted 

from the function

• High alarm limit

  High alarm limit

• Alarm delay high

Time delay for high alarm

• 

High alarm delay 2

Time delay for high alarm

A slightly longer delay period used for signals 

on the input  “DI for def. Interlock”  

• Alarm text high

  Indicate alarm text for the high alarm

• Low alarm limit

Low alarm limit

• Alarm delay low

Time delay for low alarm

• Alarm text low

Indicate alarm text for low alarm

Thermostat functions

1. Go to Configuration menu

2.  Select Thermostats

3. Thermostats

We have not used this function in our 

example. The image is included for guidance 

only.

The name of the function may be xx and 

further down in the display the alarm texts 
may be entered.

Configuration - continued

Содержание ADAP-KOOL AK-LM 340





























































































Отзывы:

Нет отзывов