WARNING
TOP SUPPORT REQUIRED TO PREVENT TIPPING
After attaching the pedestal to the drive, secure the top of
the drive to prevent the drive from tipping. The drive can
cause serious personal injury if it is not secured.
•
To secure the drive, fasten 3 M10 bolts at the upper
back edge of the drive enclosure. See
Illustration 1.7
and
Illustration 1.9
.
1
Enclosure
4
M10 nylon-insert lock nut
2
Pedestal
5
Locking bracket
3
Bolt at rear of pedestal
6
Slotted hole in enclosure
Illustration 1.4 Pedestal-to-Enclosure Back Mounting Points
1
Enclosure
2
Pedestal
3
M10x22 screws (rear corner bolts not shown)
Illustration 1.5 Pedestal-to-Enclosure Front Mounting Points
Installation Instructions
Tall Pedestal Kit for E1h/E2h Drives
VLT
®
FC Series FC 102, FC 103, FC 202, and FC 302
4
Danfoss A/S © 03/2018 All rights reserved.
MI35V102
