Danfoss 176F6609, Руководство по установке

Страница: 3 / 6

1 M6 hex nut 5 Side view of assembled ground bar and bracket
2 Ground bar assembly for mains side 6 Front view of assembled ground bar and bracket
3 Angle bracket 7 Ground bar assembly for motor side
4 M5x18 mm screw 8 End view of assembled ground bar and bracket
Illustration 1.2 Assembly of Ground Bars and Angle Brackets
1. Attach the ground bars to the angle brackets:
1a Place 1 ground bar over the 2 threaded
posts on the angle bracket.
1b Fasten 2 M6 hex nuts (T30) to the bracket
posts, 1 on each post. See
Illustration 1.2
.
1c Tighten nuts to 3.9 Nm (35 in-lb).
1d Repeat for remaining ground bar and angle
bracket. Position ground bar with the long
end oriented in the opposite direction on
Installation Instructions
Ground Bar Kit for E1h/E2h Drives
VLT
®
FC Series FC 102, FC 103, FC 202, and FC 302
MI35K102 Danfoss A/S © 10/2017 All rights reserved.
3