Danfoss 176F4184, Руководство по установке

Страница: 5 / 14

1.
2.
1 Top cover
2 Top cover gasket
3 Base plate gasket
4 Base plate with M5x12 screws
5 Cable entry gasket
6 Cable entry plate
7 Duct frame top gasket
8 Duct frame
9 Duct front gasket
10 Duct front cover
11 M5 nut
12 Drain tube
13 Back vent gasket
14 Seal plates
15 Seal plate gaskets
16 M10x30 mm mounting screws
17 Grill gasket
18 Back grill
19 Side gasket, left
20 Side gasket, right
21 Bottom gasket
22 Bottom cover plate
2.3 Installing the Back Vent Gasket
To install the back vent gasket, use the following steps. See Illustration 3 .
Procedure
Peel the paper from the self-adhesive back vent gasket.
Attach the back vent gasket around the upper opening in the back of the frequency converter.
e3
0b
k8
39
.1
0
Illustration 3: Installation of Back Vent Gasket
AN440656954288en-000101 / 136R0326 | 5 Danfoss A/S © 2023.09
Installation
In-back/Out-back Cooling Kit for FK09a/FB09a and FK10a/FB10a
Installation Guide