Danfoss 176F4057, Руководство по установке

Страница: 10 / 14

1.
2.
3.
-
-
1
2
3
e3
0b
g1
62
.1
0
6
4
5
Illustration 7: Installation of the Top Cover
1 M5x14 screw
2 Top cover
3 Top gasket
4 Top vent
5 M5x12 screws (loosened, not removed)
6 Top of frequency converter
2.6 Installing the Bottom Cover
N O T I C E
DRAIN OPENING
The bottom cover features a drain opening in the middle of the plate.
To drain moisture in wet or humid environments, attach nylon tubing with interior diameter of 8 mm (0.3 in).
To seal the drain in dry environments, fasten a screw in the drain hole.
To install the bottom cover at the lower end of the cooling back channel, use the following steps. See Illustration 8 .
Procedure
Remove the paper backing from the bottom gasket.
Adhere the gasket to the upper side of the bottom cover.
Position the bottom cover and gasket over the opening at the lower end of the cooling channel.
AN361428862578en-000101 / 136R0249 10 | Danfoss A/S © 2022.03
Installation
In-back/Out-back Cooling Kit for FA11-FA12
Installation Guide