DANELEC User Guide V1.1
28
12.
Installing AIO Permit
The Admiralty Information Overlay (AIO) is installed in the Danelec DM800 ECDIS G2 by installing the Cell GB800001
included in the PERMIT.TXT file and then the AIO Data.
Install AIO Cell Permit
1.
Select the
‘Nav Data’
Tab from the Main Menu:
2.
Select
‘Install Charts’
. Click on
‘Install Permits’
The
‘Install Permits’
panel opens:
3.
Press the
‘Refresh
’
button in the upper-right corner of the panel and the ECDIS starts searching for the AIO
Cell Permit:
To stop the search, press the
‘Cancel’
button in the upper-right corner of the panel.
The search stops and the
‘Cancel’ button changes to the ‘Refresh’
button. To restart the search, press the
‘Refresh’ button and the search restarts.
4.
Once the search is completed, all found ENC Permits are displayed in the panel.
Select the ENC Permit file you want to install and the installation starts immediately.
