DANE-ELEC SO WORLD TV -, Руководство пользователя

Страница: 45 / 47

45
Q: I want to access files with the Player that I have shared in my network. My home network is working correctly, but the
Player does not list the files.
A: If you do not have access to the shared files, please check the following points:
1) Check if the network cable is connected properly at both sends, i.e. to the Player
and to your network.
2) Make sure that the computer that you want to access is running and not in a standby or idle mode.
3) Check the network and file sharing settings on your computer.
4) Check that you have entered the correct user name and password. Please note that they are case sensitive.
5) Make sure that your firewall settings permit the Player to access your computer.
6) If you want to access files that are stored on a USB data storage device which is connected to a router and thus made
available as network storage, please note that you must set up a connection to the drive using "My_Shortcuts". To do so,
you must enter the IP address of your router as well as the user name and the password necessary to access the network
storage.
Q: How is it possible that the playback of a file from a shared folder in the network is aborted?
A: The energy saving settings of the computer or the NAS interrupt the connection.
If the energy saving settings of your computer or your NAS are active, then they can go into an idle state or a sleep mode
even though they are being accessed via the network. During a sleep mode no data is transferred via the network. Please
adjust the energy saving settings of the media source so that it does not go into a sleep mode while you play files via the
network.
Q:Why is it possible that there are interruptions when playing movies from my local network?
A: Sometimes, there are several devices in a network that have to share the maximum data transfer rate possible via a
network connection (shared medium). If there are several connections active in the network you use the Player in (e.g. to
the internet, a shared printer, etc.), it is possible that this lowers the data transfer rate available for the streaming of the data
to the Player to a level that is insufficient for the playback of e.g. a DVD file or an HD movie file. Should you experience such
problems, please try to reduce the amount of data transferred by other users of your network.
Q: While using the Player, it no longer responds to my instructions.
A: This problem may have several causes. Please check the following items:
1) Please aim the remote control in the direction of the Player so that direct visual contact between these two devices exists
and ensure that the infrared receiver of the remote control and the Player are not covered.
2) Check the battery in the remote control and, if necessary, replace it with a new one.
Q: I have connected the Player to my TV via HDMI and I want to change the video output signal, but the video output
resolution I want to use is not available.
A: This problem may have several causes. Please check the following items:
1) Your TV does not support all possible video output resolutions.
Go to the settings menu of your Player and select "HDMI Auto" under the menu item "TV system". Your Player will try to
automatically select the best possible video output resolution for your TV.
2) In some rare cases it is possible that not all options supported by the TV are selectable. This problem can occur when
the TV is switched on from its standby mode, regardless of the current operating status of the PLAYER
In order to be able to select all video output resolutions supported by your TV, disconnect your Player from the power supply
and reconnect it after a few seconds. Now all available video output resolutions are shown in the settings menu.
Q: Why can’t I hear any sound on my television when I connect it via HDMI?
A: This problem may have several causes. Please check the following items:
An audio output format that is not supported by your television is selected.
The volume is too low / Mute is active.
Please select the correct digital output mode in the Set-up Menu. Go to the audio settings menu and select the menu entry
"Digital-Audio -Out" and choose the option "HDMI LPCM/RAW" if your television set does not support real surround sound.
You can also refer to the Audio Settings.
Q: Why mustn’t I disconnect the Player from the mains supply without having switched it off beforehand?
A: The loading or saving of the current system settings takes approx. 10 seconds when the Player is turned on or off. If the
player is disconnected from the mains supply without having been switched off beforehand, settings and data may be lost.
Please always switch off the Player by pressing the power key on the device or on the remote control and wait until the
power key on the Player lights up red.
Q: After the player is connected to the Internet, why can’t I browse some video or news?