D&D Technologies MagnaLatch ALERT, Руководство пользователя, Страница: 11 / 22

11 MagnaLatch
®
ALERT Gate Alarm System
3.4 ACTIVATING THE DISARM FEATURE ON ALERT - OPTIONAL (CONT)
1. Insert a paper clip into the hole located
between the paper clip image and On/Off
symbol. Press once to activate the Disarm
feature. A “ramp-up” sound will be heard.
2. Close the gate and re-attach the front cover
with screw using a #1 Phillips-head screwdriver.
Disarm sounder Icon
On/Off Icon
Paper Clip Icon
Hole
Paper clip
NOTE:
If paper clip is pressed twice, a “ramp-
down” sound will be heard, indicating the
Disarm feature has been de-activated.
NOTE: The gate must be open whenever
activating or de-activating the Disarm feature,
and when using the Disarm feature.
3.5 DISARMING THE ALERT TEMPORARILY - OPTIONAL
1. To temporarily disarm the ALERT for a
maximum of 15 minutes, open the gate and
hold open until the second beep sounds.
NOTE: Do not wear gloves when disarming. The
Disarm Sensor is touch-sensitive to skin only.
NOTE:
Closing and latching the gate at any
time will re-arm the ALERT Module.
2. Place finger on top of the Disarm Sensor
and hold for 5 seconds. You will then hear 4
beeps followed by a “ramp-up” sound.
NOTE: The ALERT is now de-activated for up
to 15 minutes as long as the gate is held open.
After 15 minutes, or if closing the gate at any
time, the ALERT Module will re-arm itself.
A
Disarm
Touch Sensor
NOTE:
The Disarm Sensor is touch sensitive and does not require to be pushed inward. It
responds to contact with your skin and will not operate when wearing gloves.
WARNING: DO NOT disarm the ALERT on a pool or spa gate. Activating
the Disarm feature and using it is the sole responsibility of the user and
not the manufacturer.
STOPPING THE ALARM -
Closing and latching the gate will silence the alarm.
•owners manual ML3 alert_ENGLISH.indd 11 22/10/14 2:43 PM