d&b audiotechnik Z5576.000, Руководство пользователя

Страница: 8 / 22

Z5577.000 Front panel
3.1. Intended use
The Z5577.000 Mains power distributor is designed and
dimensioned to provide and distribute the mains power supply
necessary for
one Z5576.000 Touring rack assembly.
It is a protective class 1 unit with IP class 20 (NOT rain-, drip-, or
splash-proof!).
The Z5577.000 Mains power distributor must not be used for any
other purpose or outside the system rack.
3.2. Rear panel
3.2.1. MAINS IN
WARNING!
Potential risk of electric shock.
The mains power distributor is a protective class 1 unit. A missing
earth (ground) contact may cause dangerous voltages in the
housing and controls and may lead to electric shock.
▪ Connect the unit to mains power supplies with protective earth
only.
▪ If there is any sign of obvious damage to the power cord
and/or CEE mains connector, do not use the unit and replace it
before further use.
▪ Do not connect or disconnect the CEE mains connector under
load or live.
▪ Please ensure the mains connector is accessible at any time to
disconnect the unit in case of malfunction or danger.
Apart from the six fixed single-phase mains power lines (6 x
MAINS TO AMPS 230 V) for the internal mains power supply of
the amplifiers, the Z5577.000 Mains power distributor is supplied
with a fixed 3-phase power cord equipped with a 32 A CEE
(Cekon) mains connector.
Required mains supply network configuration
3-phase 230/400 VAC - 50/60 Hz - 32 A
max.
(3PNPE).
Connect only
one rack assembly to the mains power outlet of the
onsite sub-distribution.
The Z5577.000 Mains power distributor does not provide
dedicated circuit-breakers for the amplifier's mains power lines. The
respective circuit-breakers of the onsite mains distribution are used
for this purpose.
Z5577.000 Rear panel
3. Z5577.000 Mains power distributor 32 A CEE
d&b Z5576.000 Manual 1.1 en 8