8
D20 Touring rack assembly US Manual 1.0
3.3. Signal
3.3.1. 4 CH. OUTPUTS - NL8
NOTICE!
The 4 CH OUTPUTS connectors are only intended as an interface to
a rack panel or to loudspeaker multicores such as d&b Z5343.xxx
and breakout adapters such as d&b Z5347.xxx and d&b Z4348.
xxx.
Do not connect any loudspeaker cabinets, neither passive nor active
systems, to the 4 CH OUTPUTS connectors, otherwise there is a risk
of damaging the loudspeaker components or the amplifier.
Each of the 4 CH OUTPUTS connectors represents the 4 CHANNEL
OUTPUT of the respective D20 amplifier. Each connector carries the
output signals of all four channels of the amplifier with the following
pin assignment.
1+/— = Channel A pos. / neg. 2+/— = Channel B pos. / neg.
3+/— = Channel C pos. / neg. 4+/— = Channel D pos. / neg.
Please refer to the corresponding amplifier assignment label above
each connector as shown in the graphic opposite.