12
D20 Touring rack assembly US Manual 1.0
6. Z4010 DS10 Audio network bridge
6.1. Use with d&b Touring rack I/O panel
The DS10 replaces the 1RU drawer of the complete rack assembly.
1. The DS10 is mounted above the I/O panel.
If upgrading a complete rack assembly, simply remove the rack
drawer.
2. The two digital outputs at the front of the DS10 are connected to
the digital inputs D1/2 and D3/4 of the I/O panel.
3. The ETH 3 port of the DS10 is connected to the ETH 1 port of
the I/O panel in order to bridge the R1 control for the amplifiers
over the Dante network.
Note: Connect only one of the Ethernet ports on the I/O
panel to the DS10. Otherwise an Ethernet ring is built, causing
a packet storm leading to the Network no longer being
accessible.
4. On the rear, the power cord [1] (powerCON/ L5-15) is
connected to the auxiliary NEMA 5-20 socket of the mains
distributor.
Note: When ordered with a touring rack assembly the DS10 audio
network bridge will include the necessary 25cm CAT6 and XLR
cables for connecting to the I/O panel.
Redundant networking with DS10 Audio network bridge
DS10 Audio network bridge as break-in box
6.2. DS10 select example deployments
1
2
3
[1]