Rigging/derigging
7. Splay link of the last cabinet
To avoid either rattling during operation or damage to the Splay
link of the last cabinet, we recommend you to remove the Splay
link and store it temporarily in a safe place. To remove the Splay
link, proceed as follows:
1. Release and remove the ring cotter
[1] of the fixing bolt.
2. Remove the fixing bolt
[2] and the Splay link [3].
8. Rig the cabling
Connect the flying cables and link cables according to the number
of amplifier channels and cabinets used. Observe the related
loudspeaker setups for the inner (In) and outer (Out) cabinets.
9. Check the assembly
Recheck the actual status of the entire assembly.
▪ Check all Front links on both sides of the cabinets.
▪ Check the splay angle settings and the Splay links at the rear of
the cabinets and ensure all Locking pins are properly inserted
and locked.
d&b Z5458
AL Base plate Rigging manual 1.1 en
13
