background image

 

2.1. Product description
Vi7P/Vi10P are passive 3-way loudspeakers housing two 10" LF

drivers, one horn-loaded 8" MF driver and a 1.4" HF compression

driver with a rotatable CD horn producing a nominal dispersion (h

x v) of 75° x 40° (Vi7P) or 110° x 40° (Vi10P), respectively.

All components are arranged symmetrically around the center axis

of the cabinet to produce a perfect symmetrical dispersion pattern.

This setup allows for a crossover design with a well defined

overlap of adjacent frequency bands resulting in a very consistent

and accurate vertical dispersion. Due to the dipolar arrangement

of the low drivers, broadband vertical dispersion control is

maintained down to approximately 350 Hz – an outstanding

feature for a passive 3-way system.

The frequency response extends from 59 Hz to above 18 kHz.

The cabinets are constructed from marine plywood and have an

impact and weather protected PCP (Polyurea Cabinet Protection)

finish. The fronts of the loudspeaker cabinets are protected by a

rigid metal grill backed by an acoustically transparent foam.

The cabinets are fitted with two M10 threaded inserts each on the

top, bottom and rear panels to accept either:

the Z5383 VP Mounting bracket,

the Z5384 VP Flying adapter,

or the Z5384 VP Flying adapter.

In addition the Q9032 Safety eye bolt M10 can be used to apply

an independent secondary safety device.

2.2. Connections

The cabinets are fitted with a pair of NL4 M connectors and a two

pole screw terminal block (ST). All four pins of both NL4 M

connectors are wired in parallel. The cabinets use the pin

assignments 1+/1–. Pins 2+/2– are designated to active

subwoofers.

Cabinets with the weather resistant option (WR) are equipped with
a fixed input cable (PG type, H07-RN-F, 2 x 2.5 mm

2

 (AWG 13),

standard length 5.5 m (18 ft).

Pin equivalents of the applicable connector options are listed in the

table below.

NL4 M

1+

1–

2+

2–

ST

+

n.a.

n.a.

PG

Brown (+)

Blue (–)

n.a.

n.a.

2. Vi7P/Vi10P loudspeaker

 

d&b Vi7P/Vi10P Manual 1.1 en

5

Содержание Vi7P

















Отзывы: