d&b audiotechnik Vi-GSUB, Руководство пользователя

Страница: 7 / 12

Step 2 Step 3 Step 4/5 Step 6
Installing the fixed cable connection
NL4 connection with cover plate
The two NL4 connector sockets of the cabinet's connector panel
are located in a recess to allow the use of the cover plate [1]
together with NL4 cable connectors, as shown in the graphic
opposite.
Note: Neutrik NL4FC type connectors must be used for this
option.
The cover plate is equipped with two knockout openings to allow
daisy chaining of the loudspeaker.
To use the NL4 connection, proceed in the same manner as
described in the previous section .
2.3. Operation
NOTICE!
Only operate d&b loudspeakers with a correctly configured d&b
amplifier, otherwise there is a risk of damaging the loudspeaker
components.
Application Setup Cabinets per
channel
Vi-GSUB V-GSUB 2
Within applicable d&b amplifiers (except for the D6 amplifier), the
controller setup is available in Dual Channel or Mix TOP/SUB
mode.
NL4 cable connection with cover plate [1]
d&b Vi-GSUB Manual 1.1 en 7